Pneumatic Eccentric Press 150T

Steel Construction Pneumatic Eccentric Press;The body of our 40-60-80-130-200-250 tons

45,950.00

Availability:

5 in stock

Description

TECHNICAL SPECIFICATIONS (PNEUMATIC)
Capacity Unit 40 ton 60 ton 80 ton 130 ton 200 ton
Adjusting of Stroke mm 10-70 10-85 10-90 10-110 10-140
Course Stroke Number a/d 72 60 56 53 44
Morse diameter mm 35 40 45 50 70
Knob Shaft Max Operating Range mm 55 60 75 90 100
Head dimensions mm 300x190x380 340x210x440 370x230x480 420x250x560 520x280x695
Table dimensions mm 420×550 500×620 540×670 610×770 790×990
Hole diameter of the Table mm 140 160 170 200 250
Between table central and body mm 210 250 270 300 395
Between table and head mm 280 320 360 450 580
Between adding table and head mm 210 230 270 350 460
Pressure of clutch bar 6 6 6 6 6
Connectable Top Mould size mm 190×350 210×380 230×410 250×450 280×520
Crank Shaft Stopping Point Top dead point
Main voltage   400V-3faz-50hz
Control voltage V 24 24 24 24 24
System of fuse Mechanical disc
System of lubricate Manual pump
Height of press mm 2150 2400 2600 2900 3300
Depth of press mm 1100 1350 1500 1800 2500
Width of press mm 1000 1200 1250 1400 1700
Approx weight kg 1575 2900 3150 5250 10400
Power of engine hp 5,5 7,5 10 15 20
Motor speed d/d 1420 1440 1445 1440 1450
Structure of body Steel construction

Steel Construction Pneumatic Eccentric Press;
The body of our 40-60-80-100-130-200 tons presses are manufactured as steel construction and supported with necesary resistance as per its pressing power.

Quality material – Qualitied workmanship
Our presses are combined with the top quality material, qualitied workmanship and esthetics.

Parallelism and set square
Head rear slide can also be adjustable like front slides.Thanks to this, nonregulation, which may occur between the head and table as time passes, is casily cradicated.

Lubrication System
In order to provide a practical and easy-lubrication, a manual double-hand controlled electro-pneumatic system is installed.

Revolving Bearings
Made of special alloyed bronze material resistant to high cycles and stroke.

Cotter System
Clutch cotter is made in two pieces to provide a convenience in changing.

Fuse
A fuse system is installed for the purpose of decreasing the possible damages to minimum when exceeding over the press capacity.

Guaranty
Guaranteed two years against the material and workmanship defects.Use faults are exempted from the guaranty.

Technical Service
The malfunctions which may occur within the guarantee period and in the following years are solved by our service specialists as soon as possible.

Reviews

There are no reviews yet.

Be the first to review “Pneumatic Eccentric Press 150T”

Your e-mail address will not be published. Required fields are marked *