CNC Plasma Cutting Machine – Hvac Line

Powermax® 65 Amp

Step motor pneumatic 1500×3000 mm



Allgemeine Informationen

Our compact machine model designed to cut especially thin steels between 0.40 mm to 6 mm. It has a cutting area of ​​1600 mm x 3100 mm. Especially designed for producers such as ventilation, steel doors, elevator, etc., 2.3m x 3,8m can be fit in a similar area, so is the most preferred machine in compact models. A change of location can be made with the help of a single forklift or pallet truck. Installation is not required and it just work with electricity and compressed air. If the basement is to be operated in the underground installations, it can be made partly and assembled at your workshop.

0,40mm – 6 mm Cutting Thickness – 1600mmx3100mm Cutting Dimension. 8.5 Nm Leadshine Stepper and 1/3 brittle Belt Pulley system on all axes. – American Hypertherm® Powermax® 45 Amp Plasma Unit. – Hiwin Linear rails on all axes. – Windows Based Cnc Controls. – A system of resumption from where they are stuck. – 15,000 mm Idle Speed. – Helis Kramer and Pinion sensitive drive system. – Ventilation system that provides smoke absorption from the place where cut is made. ((Fan not included, it will supply itself according to customer factory) – Nesting software. – Pneumatic height control

Especially designed for Ventilation, Elevator Cabin and Doors, Steel Doors, Panel manufacturing sectors, you can get high savings with low investment costs. Designed specifically for thinner steel, this model features Low Investment Costs, enabling you to lower workmanship to a minimum and accelerate your business. Cutting up to 16 mm is possible with the Hvac Line Xl

With the original software that comes with the machine, you can minimize your steel Costs from your machine and run it with full capacity. If you have software that you have already used, you can talk to our sales representatives and take advantage of the another options. Using the software with your own language faster and easier.

Our machine designed with the latest technology design and analysis softwares and is presented to our customers by blending with years of experience. It has become the indispensable plasma of the Narrow Fields because it has the smallest and most rigid design in the world among 1500×3000 machines. most preferred compact plasma model. It can fit in an area of 2.3mx3.8m.


There are no reviews yet.

Be the first to review “CNC Plasma Cutting Machine – Hvac Line”

Your e-mail address will not be published. Required fields are marked *